The Stanadyne 06320 is a new, genuine Stanadyne DE10 injection pump, model DE2635-6320. It is the electronically controlled rotary distributor pump for John Deere 6068T (turbocharged) and 6068D (naturally aspirated) 6.8 L engines built with the DE10 system. John Deere sells it as RE568067, which replaced RE518164, and its John Deere reman equivalent is SE501237. It supersedes Stanadyne 06249 and 06257.

Pumps are replaced for hard starting or no start, low power, rough running, fuel leaks, or damage from water or dirt in the fuel. The DE10 is controlled electronically, so rule out wiring, controller and fuel supply faults before you condemn the pump. The 6068H takes a different pump (Stanadyne 06321), and the 4.5 L 4045 uses 06322 or 06323.

Specifications

Fits / Applications

• John Deere 6068T 6.8 L turbocharged engines built with the Stanadyne DE10 pump
• John Deere 6068D 6.8 L naturally aspirated engines built with the Stanadyne DE10 pump
• John Deere 6615, 6715, 7220 and 7320 tractors with the 6.8 L DE10 engine (John Deere lists pump RE518164, now RE568067, for these tractors)

Install and time the pump by the John Deere manual for the DE10 fuel system (CTM331) or Stanadyne installation instruction IT-117, which the Stanadyne spec sheet calls for. Fit new fuel filters, prime the low-pressure side, and cap every open line and port while the pump is off. Never steam clean or pour cold water on a warm injection pump; John Deere warns it can seize internal parts. Check the pump harness connection and clear stored engine fault codes after the swap.

Part Numbers & Cross Reference

John Deere RE568067  ·  John Deere (earlier) RE518164  ·  John Deere (earlier) RE518089  ·  John Deere (earlier) RE515679  ·  John Deere (earlier, per catalogs) RE516988  ·  John Deere (reman) SE501237  ·  Stanadyne model DE2635-6320  ·  Stanadyne (superseded) 06249  ·  Stanadyne (superseded) 06257  ·  Stanadyne (earlier, per catalogs) 05807, 05822, 05964, 05965, 06230

Cross-reference numbers can change with engine serial, build year and emissions tier, so treat this list as a starting point. Send us your engine serial number and we will confirm the exact match against your build before anything ships. That check is free and takes a few minutes.

Frequently Asked Questions

Which John Deere engines and tractors take the Stanadyne 06320?

John Deere 6068T (turbocharged) and 6068D (naturally aspirated) 6.8 L engines built with the Stanadyne DE10 system. John Deere lists this pump for 6615, 6715, 7220 and 7320 tractors with the 6.8 L DE10 engine.

What numbers does Stanadyne 06320 replace?

It is Stanadyne model DE2635-6320 and supersedes Stanadyne 06249 and 06257. John Deere sells it as RE568067, which replaced RE518164, and the John Deere reman equivalent is SE501237.

Will the 06320 fit a 6068H or a 4045?

No. The 6068H takes Stanadyne 06321 (RE568069), and the 4.5 L 4045 uses 06322 (RE568070) or 06323 (RE568071). Call 530-668-0818 with the RE number or Stanadyne model number from the pump name plate and we confirm the match at no charge before anything ships.

Is the Stanadyne 06320 new, and is there a core charge?

It is a new, genuine Stanadyne DE10 pump in original packaging. It is sold outright, so there is no core charge and no old pump to send back.

Related Parts

• John Deere 4045H/T & 6068H/T Rate-Shaping Pencil Injector | Stanadyne 38416 New (RE531436)
• Stanadyne 06322 New Injection Pump | John Deere 4045D & 4045T (DE2435-6322)
• Stanadyne 06323 New Injection Pump | John Deere 4045H (DE2435-6323)
• John Deere 6068D DP200 Fuel Injection Pump | Delphi 8924A470W New (RE509503)

Why Buy From Valley Fuel Injection

We are a diesel fuel-injection and turbocharger shop in Woodland, CA, rebuilding pumps, injectors and turbos on our own benches since 1993, not a drop-ship storefront. When you call, you talk to the people who test these units. Confirm fitment against your engine serial, VIN or build date before you order. Call us and we will help you match the right part.