This is a new, genuine Kubota engine control unit (ECU) assembly, part number EH705-60200. Kubota’s description for it is ECU,ASSY(16STA-G). Kubota’s WG Series parts lists name each ECU by engine, build code and fuel. On the WG1605-G-E3-KEA-1, for example, the ECU is ECU,ASSY(16KEA-G). No catalog we could open names the engine or the machine for the 16STA-G code, so order it by the number and code on your old ECU.

An ECU is usually replaced after water damage, a burned driver circuit or a failed connector, once the wiring, the grounds, the sensors and battery voltage have been ruled out. Kubota builds a separate ECU for each engine build and fuel, and it lists a second ECU with the same 16STA-G name, EH046-60200. So the engine model alone is not enough to order by.

Specifications

Fits / Applications

• Direct replacement for a Kubota ECU marked EH705-60200, Kubota code 16STA-G
• Engine model not published for this number: match the number and code on your old ECU
• Each Kubota ECU code is a separate part number, and one does not stand in for another

Disconnect the battery before you unplug the ECU. Refit the ECU on all of its vibration mounts, with every rubber cushion and spacer back in place. Check the connector pins, the grounds and battery voltage, since the fault that damaged the old unit can damage the new one. If a fault light stays on after the swap, have a Kubota engine dealer read the codes.

Part Numbers & Cross Reference

Kubota EH705-60200

Cross-reference numbers can change with engine serial, build year and emissions tier, so treat this list as a starting point. Send us your engine serial number and we will confirm the exact match against your build before anything ships. That check is free and takes a few minutes.

Frequently Asked Questions

What engine does the EH705-60200 fit?

No catalog we could open names the engine for this number. The ECU carries Kubota’s code 16STA-G, so match that code and the part number on your old ECU. Call 530-668-0818 with the engine model and serial number and we will check it before you order.

Is the EH705-60200 the same as the EH046-60200?

Not as far as any catalog shows. Kubota lists both under the 16STA-G name as separate part numbers, and no catalog says they interchange. Go by the number on your old ECU.

Can I use it in place of an ECU with a different code?

No. Kubota gives each engine build and fuel its own ECU code and part number, for example 16KEA-G on the WG1605-G-E3-KEA-1. Match the code and the number on your old ECU.

Is this ECU new or remanufactured?

New, genuine Kubota.

Related Parts

• Kubota WG1605, WG1903, WG2503 & WG3800 Oxygen (O2) Sensor | Genuine Kubota EG523-12240
• Kubota WG1605, WG2503 & WG3800 Engine Ignition Coil | Genuine Kubota EG523-67090
• Kubota WG1605 4-Cylinder Engine Exhaust Manifold | Genuine Kubota EG522-12313
• Kubota Engine Control Unit (ECU) Sub-Assembly, Code 03 CPG | Genuine Kubota 1H043-59092

Why Buy From Valley Fuel Injection

We are an authorized Kubota dealer and a diesel fuel-injection shop in Woodland, CA, working on diesel engines since 1993. When you call, you talk to people who know Kubota engines, and we check the part number against your engine serial or machine model before anything ships, so the right part arrives the first time. See our Kubota engine sales, parts and service.